[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.000000] 2024, 2025, 2026
[ 1.000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All rights reserved.
[ 1.000000] NetBSD 11.99.5 (ULTRA-PCI) #161: Fri Feb 13 15:47:27 CET 2026
[ 1.000000] jdc@morava:/mnt/obj/sparc64/mnt/src/sys/arch/sparc64/compile/ULTRA-PCI
[ 1.000000] total memory = 16384 MB
[ 1.000000] avail memory = 16070 MB
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] mainbus0 (root): SUNW,A70 (Sun Ultra 45 Workstation): hostid 840fc6f4
[ 1.000000] cpu0 at mainbus0: SUNW,UltraSPARC-IIIi @ 1600 MHz, CPU id 0
[ 1.000000] cpu0: manuf 3e, impl 16, mask 34
[ 1.000000] cpu0: system tick frequency 20 MHz
[ 1.000000] cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
[ 1.000000] cpu1 at mainbus0: SUNW,UltraSPARC-IIIi @ 1600 MHz, CPU id 1
[ 1.000000] cpu1: manuf 3e, impl 16, mask 34
[ 1.000000] cpu1: system tick frequency 20 MHz
[ 1.000000] cpu1: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
[ 1.000000] memory-controller at mainbus0 not configured
[ 1.000000] memory-controller at mainbus0 not configured
[ 1.000000] pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 12
[ 1.000000] pyro0: pci0 at pyro0
[ 1.000000] pci0: i/o space, memory space enabled
[ 1.000000] ppb0 at pci0 dev 0 function 0: PLX Technology product 8532 (rev. 0xaa)
[ 1.000000] ppb0: PCI Express capability version 1 <Upstream Port of PCI-E Switch>
[ 1.000000] pci1 at ppb0 bus 3
[ 1.000000] pci1: i/o space, memory space enabled
[ 1.000000] ppb1 at pci1 dev 1 function 0: PLX Technology product 8532 (rev. 0xaa)
[ 1.000000] ppb1: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x2 @ 2.5GT/s
[ 1.000000] pci2 at ppb1 bus 4
[ 1.000000] pci2: i/o space, memory space enabled
[ 1.000000] ppb2 at pci2 dev 0 function 0: Acer Labs M5249 Hypertransport to PCI Bridge (rev. 0x00)
[ 1.000000] ppb2: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
[ 1.000000] pci3 at ppb2 bus 5
[ 1.000000] pci3: i/o space, memory space enabled
[ 1.000000] ohci0 at pci3 dev 28 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
[ 1.000000] ohci0: interrupting at ivec 780
[ 1.000000] ohci0: OHCI version 1.0, legacy support
[ 1.000000] usb0 at ohci0: USB revision 1.0
[ 1.000000] ohci1 at pci3 dev 28 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
[ 1.000000] ohci1: interrupting at ivec 780
[ 1.000000] ohci1: OHCI version 1.0, legacy support
[ 1.000000] usb1 at ohci1: USB revision 1.0
[ 1.000000] ohci2 at pci3 dev 28 function 2: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
[ 1.000000] ohci2: interrupting at ivec 780
[ 1.000000] ohci2: OHCI version 1.0, legacy support
[ 1.000000] ohci2: Clear PME# now
[ 1.000000] usb2 at ohci2: USB revision 1.0
[ 1.000000] ehci0 at pci3 dev 28 function 3: Acer Labs M5239 USB 2.0 Host Controller (rev. 0x01)
[ 1.000000] ehci0: 32-bit DMA
[ 1.000000] ehci0: interrupting at ivec 781
[ 1.000000] ehci0: EHCI version 1.0
[ 1.000000] ehci0: 3 companion controllers, 3 ports each: ohci0 ohci1 ohci2
[ 1.000000] usb3 at ehci0: USB revision 2.0
[ 1.000000] auacer0 at pci3 dev 29 function 0: Acer Labs M5455 Audio controller
[ 1.000000] auacer0: interrupting at ivec 785
[ 1.000000] auacer0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
[ 1.000000] auacer0: ac97: ext id 0x601<AC97_22,AMAP,VRA>
[ 1.000000] audio0 at auacer0: playback, capture, full duplex, independent
[ 1.000000] audio0: slinear_be:16 -> slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[ 1.000000] audio0: slinear_be:16 <- slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
[ 1.000000] spkr0 at audio0: PC Speaker (synthesized)
[ 1.000000] wsbell at spkr0 not configured
[ 1.000000] alipm0 at pci3 dev 30 function 1alipm0: autoconfiguration error: can't map I/O space
[ 1.000000] aceride0 at pci3 dev 31 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc8)
[ 1.000000] aceride0: bus-master DMA support present, but unused (forced off by config file)
[ 1.000000] aceride0: primary channel configured to native-PCI mode
[ 1.000000] aceride0: using ivec 2f84 for native-PCI interrupt
[ 1.000000] atabus0 at aceride0 channel 0
[ 1.000000] aceride0: secondary channel configured to native-PCI mode
[ 1.000000] atabus1 at aceride0 channel 1
[ 1.000000] ppb3 at pci1 dev 2 function 0: PLX Technology product 8532 (rev. 0xaa)
[ 1.000000] ppb3: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x2 @ 2.5GT/s
[ 1.000000] pci4 at ppb3 bus 6
[ 1.000000] pci4: i/o space, memory space enabled
[ 1.000000] ppb4 at pci4 dev 0 function 0: ServerWorks BCM5714/BCM5715 Integral PCI-E to PCI-X Bridge (rev. 0xb3)
[ 1.000000] ppb4: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
[ 1.000000] pci5 at ppb4 bus 7
[ 1.000000] pci5: i/o space, memory space enabled
[ 1.000000] bge0 at pci5 dev 4 function 0: Broadcom BCM5715 Gigabit Ethernet
[ 1.000000] bge0: interrupting at ivec 3796
[ 1.000000] bge0: HW config 00000015, 00000015, 00000000, 00000000 00000000
[ 1.000000] bge0: ASIC BCM5715 A1 (0x9001), Ethernet address 00:14:4f:0f:c6:f4
[ 1.000000] bge0: autoconfiguration error: WARNING: failed to restrict dma range, falling back to parent bus dma range
[ 1.000000] bge0: setting short Tx thresholds
[ 1.000000] brgphy0 at bge0 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0
[ 1.000000] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.000000] bge1 at pci5 dev 4 function 1: Broadcom BCM5715 Gigabit Ethernet
[ 1.000000] bge1: interrupting at ivec 3797
[ 1.000000] bge1: HW config 00010014, 00000014, 00000000, 00000000 00000000
[ 1.000000] bge1: ASIC BCM5715 A1 (0x9001), Ethernet address 00:14:4f:0f:c6:f5
[ 1.000000] bge1: autoconfiguration error: WARNING: failed to restrict dma range, falling back to parent bus dma range
[ 1.000000] bge1: setting short Tx thresholds
[ 1.000000] brgphy1 at bge1 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0
[ 1.000000] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.000000] ppb5 at pci1 dev 3 function 0: PLX Technology product 8532 (rev. 0xaa)
[ 1.000000] ppb5: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s
[ 1.000000] pci6 at ppb5 bus 8
[ 1.000000] pci6: i/o space, memory space enabled
[ 1.000000] wm0 at pci6 dev 0 function 0, 32-bit DMA: Intel PRO/1000 PT (82571EB) (rev. 0x06)
[ 1.000000] wm0: interrupting at ivec 3797
[ 1.000000] wm0: PCI-Express bus
[ 1.000000] wm0: 2048 words (16 address bits) SPI EEPROM, version 5.11.2, Image Unique ID ffffffff
[ 1.000000] wm0: ASPM L1 is disabled to workaround the errata.
[ 1.000000] wm0: RX packet buffer size: 32KB
[ 1.000000] wm0: Ethernet address 00:15:17:a6:3b:ee
[ 1.000000] wm0: 0x224040<SPI,PCIE,ASF_FIRM,WOL>
[ 1.000000] igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
[ 1.000000] igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.000000] wm1 at pci6 dev 0 function 1, 32-bit DMA: Intel PRO/1000 PT (82571EB) (rev. 0x06)
[ 1.000000] wm1: interrupting at ivec 3794
[ 1.000000] wm1: PCI-Express bus
[ 1.000000] wm1: 2048 words (16 address bits) SPI EEPROM, version 5.11.2, Image Unique ID ffffffff
[ 1.000000] wm1: ASPM L1 is disabled to workaround the errata.
[ 1.000000] wm1: RX packet buffer size: 32KB
[ 1.000000] wm1: Ethernet address 00:15:17:a6:3b:ef
[ 1.000000] wm1: 0x24040<SPI,PCIE,ASF_FIRM>
[ 1.000000] igphy1 at wm1 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
[ 1.000000] igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.000000] ppb6 at pci1 dev 8 function 0: PLX Technology product 8532 (rev. 0xaa)
[ 1.000000] ppb6: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x8 @ 2.5GT/s
[ 1.000000] pci7 at ppb6 bus 9
[ 1.000000] pci7: i/o space, memory space enabled
[ 1.000000] ppb7 at pci1 dev 9 function 0: PLX Technology product 8532 (rev. 0xaa)
[ 1.000000] ppb7: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x8 @ 2.5GT/s
[ 1.000000] pci8 at ppb7 bus 10
[ 1.000000] pci8: i/o space, memory space enabled
[ 1.000000] ppb8 at pci8 dev 0 function 0: Intel Serial to Parallel PCI Bridge A (rev. 0x09)
[ 1.000000] ppb8: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
[ 1.000000] pci9 at ppb8 bus 11
[ 1.000000] pci9: i/o space, memory space enabled
[ 1.000000] mpt0 at pci9 dev 1 function 0: Symbios Logic SAS1064 (rev. 0x02)
[ 1.000000] mpt0: interrupting at ivec 2f8f
[ 1.000000] mpt0: Phy 0: Link Status Unknown
[ 1.000000] mpt0: Phy 0: Link Status Unknown
[ 1.000000] scsibus0 at mpt0: 63 targets, 8 luns per target
[ 1.000000] ppb9 at pci8 dev 0 function 2: Intel Serial to Parallel PCI Bridge B (rev. 0x09)
[ 1.000000] ppb9: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
[ 1.000000] pci10 at ppb9 bus 12
[ 1.000000] pci10: i/o space, memory space enabled
[ 1.000000] mpt1 at pci10 dev 2 function 0: Symbios Logic 53c1020/53c1030 (rev. 0x08)
[ 1.000000] mpt1: interrupting at ivec 2f90
[ 1.000000] scsibus1 at mpt1: 16 targets, 8 luns per target
[ 1.000000] mpt2 at pci10 dev 2 function 1: Symbios Logic 53c1020/53c1030 (rev. 0x08)
[ 1.000000] mpt2: interrupting at ivec 2f91
[ 1.000000] scsibus2 at mpt2: 16 targets, 8 luns per target
[ 1.000000] pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 2
[ 1.000000] pyro1: pci11 at pyro1
[ 1.000000] pci11: i/o space, memory space enabled
[ 1.000000] radeonfb0 at pci11 dev 0 function 0: ATI Technologies FireGL V3100 (RV370) 5B64 (rev. 0x80)
[ 1.000000] trying to read disabled BIOS...
[ 1.000000] radeonfb0: No video BIOS, using default clocks
[ 1.000000] radeonfb0: refclk = 27.000 MHz, refdiv = 12 minpll = 125000, maxpll = 400000
[ 1.000000] radeonfb0: 64 MB aperture at 0x10000000, 64 KB registers at 0x00100000
[ 1.000000] radeonfb0: display 0: initial virtual resolution 640x480 at 8 bpp
[ 1.000000] radeonfb0: using 32 MB per display
[ 1.000000] radeonfb0: port 0: physical 1024x768 60Hz
[ 1.000000] radeonfb0: port 1: physical 1024x768 60Hz
[ 1.000000] wsdisplay1 at radeonfb0 kbdmux 1
[ 1.000000] wsmux1: connecting to wsdisplay1
[ 1.000000] wsdisplay1: screen 0-3 added (fb, vt100 emulation)
[ 1.000000] drm at radeonfb0 not configured
[ 1.000000] ebus0 at mainbus0
[ 1.000000] flashprom at ebus0 addr 0-1fffff not configured
[ 1.000000] bq4802rtc0 at ebus0 addr 100000-10000f: real time clock
[ 1.000000] com0 at ebus0 addr 80-87 ipl 7c8: ns16550a, 16-byte FIFO
[ 1.000000] com0: console
[ 1.000000] com1 at ebus0 addr 0-7 ipl 7c8: ns16550a, 16-byte FIFO
[ 1.000000] env-monitor at ebus0 addr 0-41 not configured
[ 1.000000] pcfiic0 at ebus0 addr 80-81 ipl 7c1
[ 1.000000] iic0 at pcfiic0: I2C bus
[ 1.000000] pcagpio0 at iic0 addr 0x18: PCA9556
[ 1.000000] temperature (i2c-lm76) at iic0 addr 0x2b not configured
[ 1.000000] temperature (i2c-lm76) at iic0 addr 0x48 not configured
[ 1.000000] temperature (i2c-lm76) at iic0 addr 0x4f not configured
[ 1.000000] seeprom0 at iic0 addr 0x52: front-io-fru-prom: size 8192
[ 1.000000] seeprom1 at iic0 addr 0x53: sas-backplane-fru-prom: size 8192
[ 1.000000] seeprom2 at iic0 addr 0x57: psu-fru-prom: size 4096
[ 1.000000] adt7462sm0 at iic0 addr 0x58: ADT7462 system monitor: rev. 0x4
[ 1.000000] adt7462sm0: 5 fans, 4 temperatures, 6 voltages
[ 1.000000] lm95221ts0 at iic0 addr 0x2b: LM95221 temperature sensor
[ 1.000000] lm75a0 at iic0 addr 0x4f: LM75A temperature sensor
[ 1.000000] power at ebus0 addr e0-e1 ipl 7c3 not configured
[ 1.000000] i2c at mainbus0 not configured
[ 1.000000] i2c at mainbus0 not configured
[ 1.000000] jbusi2c0 at mainbus0: addr 4000fc62020
[ 1.000000] iic1 at jbusi2c0: I2C bus
[ 1.000000] seeprom3 at iic1 addr 0x57: nvram: size 8192
[ 1.000000] ppm at mainbus0 not configured
[ 1.000000] pcons at mainbus0 not configured
[ 1.000000] WARNING: system needs entropy for security; see entropy(7)
[ 1.000000] timecounter: Timecounter "tick-counter" frequency 1600000000 Hz quality 100
[ 1.000003] timecounter: Timecounter "stick-counter" frequency 20000000 Hz quality 200
[ 1.000016] No counter-timer -- using %stick at 20MHz as system clock.
[ 1.000016] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[ 2.748380] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[ 2.748380] uhub0: 3 ports with 3 removable, self powered
[ 2.748380] uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[ 2.748380] uhub1: 3 ports with 3 removable, self powered
[ 2.748380] uhub2 at usb2: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[ 2.748380] uhub2: 3 ports with 3 removable, self powered
[ 2.748380] uhub3 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 2.748380] uhub3: 8 ports with 8 removable, self powered
[ 2.748380] scsibus0: waiting 2 seconds for devices to settle...
[ 2.748380] scsibus1: waiting 2 seconds for devices to settle...
[ 2.748380] scsibus2: waiting 2 seconds for devices to settle...
[ 2.748380] IPsec: Initialized Security Association Processing.
[ 2.854772] atapibus0 at atabus0: 2 targets
[ 2.914773] cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ-845S, , D100> cdrom removable
[ 3.014772] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
[ 3.014772] cd0(aceride0:0:0): using PIO mode 4
[ 3.304772] uhub4 at uhub3 port 7: vendor 0424 (0x0424) product 2502 (0x2502), class 9/0, rev 2.00/0.01, addr 2
[ 3.424482] uhub4: single transaction translator
[ 3.479691] uhub4: 2 ports with 2 removable, self powered
[ 4.884772] sd0 at scsibus0 target 0 lun 0: <ATA, HITACHI HDS7225S, A9CA> disk fixed
[ 4.984773] sd0: 232 GB, 238472 cyl, 16 head, 127 sec, 512 bytes/sect x 488390625 sectors
[ 5.094772] sd0: 825105 trailing sectors not covered by disklabel
[ 5.169266] sd0: tagged queueing
[ 5.214773] sd1 at scsibus0 target 1 lun 0: <ATA, HITACHI HDS7225S, A9CA> disk fixed
[ 5.305939] sd1: 232 GB, 238472 cyl, 16 head, 127 sec, 512 bytes/sect x 488390625 sectors
[ 5.424772] sd1: 825105 trailing sectors not covered by disklabel
[ 5.495950] sd1: tagged queueing
[ 7.504772] entropy: best effort
[ 20.554771] swwdog0: software watchdog initialized
[ 20.614772] sd0: 825105 trailing sectors not covered by disklabel
[ 20.684771] sd0: 825105 trailing sectors not covered by disklabel
[ 20.754771] sd1: 825105 trailing sectors not covered by disklabel
[ 20.824771] sd1: 825105 trailing sectors not covered by disklabel
[ 20.904771] WARNING: 3 errors while detecting hardware; check system log.
[ 20.984771] root on bge0
[ 21.017655] nfs_boot: trying DHCP/BOOTP
[ 25.104772] nfs_boot: DHCP next-server: 192.168.13.20
[ 25.164771] nfs_boot: my_name=zeus
[ 25.204771] nfs_boot: my_domain=home
[ 25.244771] nfs_boot: my_addr=192.168.13.49
[ 25.294771] nfs_boot: my_mask=255.255.255.0
[ 25.344771] nfs_boot: gateway=192.168.13.1
[ 33.474771] adt7462sm0: warning over limit on 'remote 2'
[ 33.564771] adt7462sm0: warning under limit on 'Vbatt'
[ 40.454771] root on 192.168.13.20:/home/export/zeus/root
[ 40.518949] root file system type: nfs
[ 40.563743] kern.module.path=/stand/sparc64/11.99.5/modules
-^- Back to my Sun OpenPROM/OpenFirmware device trees page -^-